Archive
Tag "pistol"

During conversations with Glock representatives at SHOT Show, I asked about the beavertail backstrap that had been shown at SHOT the previous year. I had a particular interest in the product, as I had acquired one in March of 2011 while at the IWA trade show. A video with some shooting impressions can be found here.

I was told that there had been several minor changes made to the design since I had last seen it displayed by Glock. Most notably, a tiny protrusion now sticks out of the Glock frame, on top of the current “beavertail” area. A corresponding dimple has been added to the inside of the beavertail backstraps, allowing them to snap into place. They’re still held in place by the longer pin supplied with every Gen 4 Glock that is intended for use with the current non-beavertail backstraps, but this is intended as an added measure of security.

The other change to the system is that the beavertails are now being made in both medium and large sizes, as opposed to the previous large-only beavertail backstrap. For those who don’t recall the Gen 4 frame sizing system, a backstrap-less Gen 4 is 2mm shorter front to back than a Gen 3; the medium backstrap adds those 2mm back for a standard Gen 3 size, and the large backstrap adds another 2mm for those with larger hands or who prefer larger (longer) frames. In other words, the medium beavertail backstrap will give you a Gen 3 size frame, but with a nice beavertail.

The new backstraps will be available sometime in the middle of this year. They’ll be included with Gen 4s sold from that time as well as being sold separately for what I’m told will be a very reasonable price. The minor physical changes will not prevent them from being attached to older Gen 4 frames.

In the eleven months that I have been using Gen 4 Glocks with beavertail backstraps, I have found that the beavertail offers slightly greater control over recoil when compared to the frame without the beavertail. I still hold the opinion that the beavertail will be of most use to those who have fat hands and/or problems with Glock slide bite. However, I also feel that the beavertail is something that any Glock shooter should consider testing out, especially since it will soon be available for minimal cost.

Read More

20120120-111051.jpg

If you’ve heard of Swiss pistolmaker Sphinx, you’ve likely heard how expensive they are. The new polymer, aluminum and steel SPD is going to bring the price into the atmosphere while maintaining Sphinx’ hallmark quality and precision.
The SPD is a 9mm and will come threaded (shown) and unthreaded. The key feature is the full length aluminum frame that means full length rails for durable full slide-to-frame contact. Look for the SPD to hit US shelves this summer.

Read More

The whole story is being reported in this week’s Marine Corps Times by my colleague James Sanborn. But, here are my thoughts on the Marines’ full fielding based on conversations with some well known trainers, as well as my own use of the Blackhawk SERPA holster.

It’s great that the Corps acknowledged the ageing design of the old M-12 holster and is replacing it so that Marines can stop spending their own money to get a decent retention holster. But buying a Level 2 SERPA for every pistol in the Corps’ inventory is, at best, controversial and, at worst, dangerous.

Aside from the obvious example of Tex Grebner shooting himself while drawing from a SERPA, there are other concerns about the safety and performance of the SERPA holster. Tex’s shooting could have been avoided with proper training, but the fact remains that a fairly experienced shooter faced with only self-imposed stressors shot himself on the draw. Sure, this could have happened with any holster, but I can’t ignore the holster’s design relying on the trigger finger for activation as a strong contributing factor.

Aside from the safety issue, there is a common thread of concern about pistols getting stuck in the holster. A roll in the dirt, gravel and even snow, get debris under the spring-loaded retention release button, jamming it closed and imprisoning the pistol. Kyle Lamb, former SFO-D member and president of Viking Tactics, tells me that he’s seen it jam in his classes, “when you get dirt in the mechanism it doesn’t work… It takes 2-3 guys pulling up on the gun to get it out of the holster.”

Here’s a video from 2005 of instructor Craig Douglas (A.K.A. Southnarc) from ShivWorks stopping a close quarters fighting class as a student and instructors struggle to free a training gun from a SERPA holster that was exposed to loose dirt.

Granted, Blackhawk did open the channel up a bit to allow trapped debris an easier path to exit, but doesn’t that allow an easier path to entrance, as well?

Who fights in dirt like that, some might say. So, a little Google-foo brings up the same issue but this time it’s in snow. I found this 2010 video on YouTube user Sturmgewehre’s “Military Arms Channel” and it demonstrates how easily the release mechanism can become jammed with fluffy white stuff. Skip to 1:46 for the goods.

YouTube Preview Image

I don’t see why Blackhawk doesn’t cover the release button with a flexible cover to keep debris out. Boom. One problem solved.

I can maybe understand individuals buying SERPAs and taking them into combat after recognizing and training to overcome the quirks of their operation. But, this is a system that demands a lot of training. Giving them to everyone in the Corps without a strong training program in place to teach and reinforce the muscle memory required for safe use in stressful situations is asking for trouble.

Lastly, I’m sure a lot of you are wondering how Safariland’s holsters fared against the Blackhawk.

SYSCOM told Marine Corps Times the Blackhawk SERPA was selected after a series of tests to include integration and interference evaluation, dry-fire drills and live-fire drills but they didn’t elaborate on the other competitors nor the program requirements.

Read More


While not explaining why, Glock USA just announced that it will trade your Gen4 recoil spring for an updated version “in order to ensure our products perform up to GLOCK’s stringent standards,” says the company.

Our guess is that it addresses a well documented issue with Gen4 pistols in which brass is extracted from the chamber, but not properly ejected. I’ll see if I can get more details, but for now you can go to Glock’s spiffy new website for information on exchanging your spring. Follow the spring exchange link on the lower, right side of the home page. Glock points out that the Gen4 G26/27 recoil spring is fine and is not part of the voluntary replacement program.

Read More

YouTube Preview Image
I’d only heard rumors of the Ninja Glock during SHOT Show last year. This is one of those behind-the-curtain products that only the most elite force mods get to see. Thankfully, someone leaked this promo video a few days ago.

Read More


If you’re about to surrender to the 100-year-old call of John Moses Browning, we’re here to help. You can probably count as many Model 1911 configurations as stars in the sky. So to make sense of all the choices, we enlisted a guy who knows his way around the 1911 like Darrell Waltrip knows his way around Daytona.

As the 1st Special Forces Operational Detachment-Delta’s primary firearms instructor, Larry Vickers worked in a place that put more than a million rounds a year through 1911s. He’s a founding member of the International Defensive Pistol Association and is a member of the American Pistolsmiths Guild. When he says he’s seen everything that can go wrong with a 1911, I believe him.

“Now, I shoot a Glock,” Vickers tells me. “Make sure you tell guys that the 1911 is a pain in the ass. If they don’t like messing around with the pistol and spending a grand to really get it tuned, then they should forget it.”

Modern pistol designs have made the 1911 obsolete in it’s role as a combat sidearm. It’s finicky and demands constant attention that a warfighter can’t afford to offer. But when it’s tuned and running well, it’s the most accurate pistol out there.

Warnings aside, the pistol’s appeal is strong and romantic. Picking up the pistol feels like shaking hands with John Wayne. It shoots man-sized rounds and, when tuned, it shoots a quarter-sized group at 50 yards.

But the 1911 is not a plug-and-play platform. Even a $2,000 semi-custom 1911 likely will need a pricey trip to a gunsmith for tweaking. Changing out all but the simplest parts will demand expert hand filing and fitting.

“I’ve had guys sell their pistols after taking my 1911 armoring class because they realized the gun just wasn’t for them,” Vickers says.

If you can’t be swayed — and you have the patience and the budget — here’s an idea of what to look for as you step into the world of the 1911.

[Bonus! Here's a link to the above image as a hi-res jpeg you can use for your desktop wallpaper.]

Read More


Want an extended slide stop release but don’t like Glock’s factory extended release lever? Go get a Vickers slide stop. It stands a little more proud than the standard slide stop without extending further to the rear. This keeps it clear of your thumb while still providing ample purchase for positive activation. $19 for your G17, G17L, 18, 19, 21, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34 or G35.

Available from Grey Group and Net Tac.

Read More


Trijicon had their new HD Night Sights out on display. It was out on a range in the middle of the day, so I could only see how well they worked going from full sunlight into shadow. For, that, they worked great. The hi-viz yellow front site ring was very easy to pick up in changing light. They were also pretty low profile, so you won’t have any holstering issues.

There are a bunch of options to choose from. There are different colored tritum tubes, green, orange or yellow for the rear sight (front is always green). Then on the rear sight, you can choose white outlined dots or black outline (shown above). Then there is the outer ring on the front sight, choose orange or yellow. I thought the yellow popped a lot more.

The sights are built to withstand some abuse. The aluminum housings contain silicone rubber cushions and the tritium lamps are placed in an aluminum cylinder and viewed through a sapphire window to protect the lamps from shock and cleaning solvents. Look for them this spring for under $200.

Read More
H&K's new .40 caliber P30

H&K's new .40 caliber P30

Heckler & Koch has a new pistol for Jack Bauer on the “24” action series. H&K is introducing their P30 series double action pistol in .40 caliber. Designed for law enforcement work, the P30 also features a de-cocking button to the left of the hammer and an ambidextrous  safety lever.
Jack Bauer has already shot a bunch of bad guys with an H&K P2000. Rumor has it that Jack will walk into a gun store and request a new P30 this season. But that’s just what I heard. H&K also offers a .40 caliber P30 without the de-cocking button and safety. The new pistols retail for about $870 to $930.

Read More
Rock River Arms PPS Pistol

Rock River Arms PPS Pistol

Rock River Arms has a new AR-style pistol that eliminates the venerable buffer tube. The result is a 5.56mm bullet launcher that’s a compact 17.5 inches long.
The new Performance Piston System Pistol, PPS for short, features gas piston operation and a recoil spring located in the rail assembly just above the bolt carrier — right where the charging handle on ARs is normally located. The PPS’s charging handle is positioned behind the gas regulator at the end of the handguard.
The PPS has an eight-inch barrel and weighs in at five pounds. Rock River is working on a full-auto version, but for now the PPS is semiautomatic only. The new design should be available in May for $1,335.

Read More